Kingston 4GB, DDR4, 2666MHz (PC4-21300), CL19, DIMM Memory
En existencia
- 4 artículos disponibles
Precio regular
£ 13.75 GBP
GBP
No se pudo cargar la disponibilidad para recoger
This document describes ValueRAM's KVR26N19S6/4 is a 512M x 64-bit (4GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx16, memory module, based on four 512M x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers.
• Power Supply_ VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
• Low-power auto self refresh (LPASR)
• Data bus inversion (DBI) for data bus
• On-die VREFDQ generation and calibration
• Single-rank
• On-board I2 serial presence-detect (SPD) EEPROM
• 8 internal banks; 2 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Fly-by topology
• Terminated control command and address bus
• PCB_ Height 1.23” (31.25mm)
• RoHS Compliant and Halogen-Free
No
Additional Information
See Overview
Package Type
Retail
Package Weight
0.0225 kg
Warranty
Lifetime
No
#Hide#LED Lighting
Heatsink
Series
2666 MHz
DDR Type
DDR4
Size
1 x 4GB
#Hide#Individual Module Size
4GB
#Hide#Total Capacity
4GB Total
Speed
Compliance
19-19-19
PC4-21300
Pins
288-pin
CAS Latency
CL19
Data Integrity Check
Non-ECC
Voltage
1.2V
Timings